Menu
header photo

Auto Scanner Tool

Go2obd.net - Professional Auto Diagnostic Tools Supplier.

BMW ICOM A2+B+C ISID Diagnostic Tool With Newest

November 23, 2016

For a particular brand of car, due to the use of zero with the same quality control, according to a unified standard, and on the same production line assembly in accordance with the strict process, so the performance index of each engine, there is no significant difference. However, in actual use, the service life of each engine is not the same, some use 500 thousand km without overhaul, and some are less than 100 thousand km, the engine will appear, burning oil, etc.. The same production line produced products, why there will be such a big difference?
The key lies in the proper use and maintenance of the car.
So in the daily use of the car, how to do to do the correct operation and maintenance of it?
1 pay attention to the new car of the close period
Go together in the new period, the engine parts cooperate with each other to rough surface will be removed, gradually formed a relatively smooth surface, improves the surface quality of the parts and the fitting accuracy, to work under normal load. So the working condition of the engine is directly related to the service life of the engine. Vehicle must pay attention to during the period of.
The high speed is prohibited. The car at the speed of the vehicle shall not exceed 70% of the maximum speed of the engine. Long time high speed is not allowed.
The non overload operation, not allowed to overload. As soon as the engine works, it is changed into low gear.
The engine started, not allowed to slam on the accelerator pedal, until the water temperature reaches the normal humidity, then a smooth start. Straight from a block must be used.
I don't drive in a bad way, reduce vibration and shock. In driving should reduce the sudden acceleration caused by overload phenomenon, such as emergency brake, long time brake or use the engine brake, etc.. As far as possible to choose a good road speed, the best results.
Note that the engine coolant temperature, oil level, found that failure to promptly eliminate.
Go right after the end of a car go maintenance.
2 adhere to the first warm car, after the start
Some drivers in the start of the car, often by a few feet close to the accelerator, so that the engine running. As everyone knows, this will cause great damage to the engine parts. Because the engine starting (especially cold start), the engine working humidity is low, the internal parts surface does not achieve sufficient lubrication, if the engine high work load, make the internal parts wear increase, change with the normal clearance.
Good driving habits should be after the engine start, the first pre heating, so that the engine coolant to reach the normal operating temperature (at least to reach more than 50 degrees Celsius), and then to improve.
BMW ICOM A2+B+C ISID Diagnostic Tool With Newest Native ISTAD/P Software
This BMW ICOM A2+B+C Diagnostic Tool with latest 12.2015 Rheingold ISID ISIS software + bmw engineer tool( includs E-sys, Inpa, Ediabas, NCS and so on) in 500GB hard disk used on win7 32bit system.
Highlights of BMW ICOM A2+B+C With Newest BMW ISTA Diagnose Software:
1. High quality BMW ICOM A2 diagnostic tool with heat sink and brand new cpu processor.
2. Latest V12.2015 BMW ISTA Rheingold and Engineer Tool in 500GB HDD.
3. All softwares pre-installed without dongle, only need to insert it into laptop.
BMW ICOM A2+B+C is a professional diagnostic & program tool for BMW group vehicles include Mini,Rolls-Royals. It is second generation BMW ICOM with robust construction, faster processor,bigger storage than its previous version.
You can go to GO2OBD.NET buy bmw icom.

LAUNCH X431 Diagun III 3 Scanner

November 23, 2016

Car maintenance and repair are closely related. Repair, maintenance, repair, repair. In the vehicle maintenance process may be found precursor or in one part of the works will malfunction or damage, thus can be used to repair maintenance time. In the repair process, maintenance of some damaged parts should be, this is a very natural thing. So how do we take care of our cars in our daily lives, let's look at the information below.
Four, cooling system cleaning and maintenance
1. In general, the car in the summer and winter season should be cleaning and maintenance time, normal driving every 6 to 8 months cleaning and maintenance time, or when the water temperature is too high, Water Leakage, boil when cleaning and maintenance time. Remove the engine tends to overheat and traces of the scale, to prevent the occurrence of harmful corrosion, avoid and prevent leakage and seal the coolant tank, completely replaced the old.
2, power steering system cleaning and maintenance
Car every driving 40000km-45000km cleaning to be maintained once, or in case of a steering difficult system leakage, replacement power steering machine parts, it is also required to clean and maintain a. Scavenging system of harmful sludge, varnish, clear turn difficult at low temperatures, to stop and prevent the leakage of hydraulic power steering, steering clear noise, completely replaced the old brake steering fluid.
3, fuel system cleaning and maintenance (that is, cleaning nozzle, valve carbon)
Under normal circumstances, the car should be cleaned and maintained 1 times per driving 10000km-15000km, or when you find that the engine is panting, sluggish and accelerate poor, take black smoke, weakness, cleaning and maintenance of oil when the 1 times. The removal of the system inside the resin and carbon, prevent harmful corrosion, avoid and stop the seal and water tank leakage, completely replace the old coolant.
As long as we usually pay attention to the car's maintenance, attention to detail, our car will be able to better maintain the new appearance.
LAUNCH X431 Diagun III 3 Scanner Original
LAUNCH X431 Diagun III 3 Scanner Original is LAUNCH's newly develpped Universal Scanner which is based on its previous version X431 Diagun. It covers more vehicles than the old X431 Diagun and has some progress to let this machine to be more friendly.
LAUNCH X431 Diagun III 3 features and progress as below:
1.X431 Diagun III connects cars through DBScar adaptor by Bluetooth.
2.Powerful diagnostic function let Diagun III 3 works on most of Asia,US and Europe vehicles.
3.More friendly Interface let You now can go into diagnostic system directly after starting machine.
4.Compact design to make it slim on your hands!
5.Compact design makes DBScar connector avoide of dust & oil by window.
6.Diagun III 3 support standard USB printer.You can print diagnostic result.
7.Continually update makes you works on more and more cars.
8.Better battery system makes Diagun III 3 non-stop working for 10 hours!
You can go to GO2OBD.NET buy LAUNCH X431.

BMW ICOM A2+B+C ISID Diagnostic Tool With Newest

November 23, 2016

For a particular brand of car, due to the use of zero with the same quality control, according to a unified standard, and on the same production line assembly in accordance with the strict process, so the performance index of each engine, there is no significant difference. However, in actual use, the service life of each engine is not the same, some use 500 thousand km without overhaul, and some are less than 100 thousand km, the engine will appear, burning oil, etc.. The same production line produced products, why there will be such a big difference?
The key lies in the proper use and maintenance of the car.
So in the daily use of the car, how to do to do the correct operation and maintenance of it?
1 pay attention to the new car of the close period
Go together in the new period, the engine parts cooperate with each other to rough surface will be removed, gradually formed a relatively smooth surface, improves the surface quality of the parts and the fitting accuracy, to work under normal load. So the working condition of the engine is directly related to the service life of the engine. Vehicle must pay attention to during the period of.
The high speed is prohibited. The car at the speed of the vehicle shall not exceed 70% of the maximum speed of the engine. Long time high speed is not allowed.
The non overload operation, not allowed to overload. As soon as the engine works, it is changed into low gear.
The engine started, not allowed to slam on the accelerator pedal, until the water temperature reaches the normal humidity, then a smooth start. Straight from a block must be used.
I don't drive in a bad way, reduce vibration and shock. In driving should reduce the sudden acceleration caused by overload phenomenon, such as emergency brake, long time brake or use the engine brake, etc.. As far as possible to choose a good road speed, the best results.
Note that the engine coolant temperature, oil level, found that failure to promptly eliminate.
Go right after the end of a car go maintenance.
2 adhere to the first warm car, after the start
Some drivers in the start of the car, often by a few feet close to the accelerator, so that the engine running. As everyone knows, this will cause great damage to the engine parts. Because the engine starting (especially cold start), the engine working humidity is low, the internal parts surface does not achieve sufficient lubrication, if the engine high work load, make the internal parts wear increase, change with the normal clearance.
Good driving habits should be after the engine start, the first pre heating, so that the engine coolant to reach the normal operating temperature (at least to reach more than 50 degrees Celsius), and then to improve.
BMW ICOM A2+B+C ISID Diagnostic Tool With Newest Native ISTAD/P Software
This BMW ICOM A2+B+C Diagnostic Tool with latest 12.2015 Rheingold ISID ISIS software + bmw engineer tool( includs E-sys, Inpa, Ediabas, NCS and so on) in 500GB hard disk used on win7 32bit system.
Highlights of BMW ICOM A2+B+C With Newest BMW ISTA Diagnose Software:
1. High quality BMW ICOM A2 diagnostic tool with heat sink and brand new cpu processor.
2. Latest V12.2015 BMW ISTA Rheingold and Engineer Tool in 500GB HDD.
3. All softwares pre-installed without dongle, only need to insert it into laptop.
BMW ICOM A2+B+C is a professional diagnostic & program tool for BMW group vehicles include Mini,Rolls-Royals. It is second generation BMW ICOM with robust construction, faster processor,bigger storage than its previous version.
You can go to GO2OBD.NET buy bmw icom.

LAUNCH X431 Diagun III 3 Scanner

November 23, 2016

Car maintenance and repair are closely related. Repair, maintenance, repair, repair. In the vehicle maintenance process may be found precursor or in one part of the works will malfunction or damage, thus can be used to repair maintenance time. In the repair process, maintenance of some damaged parts should be, this is a very natural thing. So how do we take care of our cars in our daily lives, let's look at the information below.
Four, cooling system cleaning and maintenance
1. In general, the car in the summer and winter season should be cleaning and maintenance time, normal driving every 6 to 8 months cleaning and maintenance time, or when the water temperature is too high, Water Leakage, boil when cleaning and maintenance time. Remove the engine tends to overheat and traces of the scale, to prevent the occurrence of harmful corrosion, avoid and prevent leakage and seal the coolant tank, completely replaced the old.
2, power steering system cleaning and maintenance
Car every driving 40000km-45000km cleaning to be maintained once, or in case of a steering difficult system leakage, replacement power steering machine parts, it is also required to clean and maintain a. Scavenging system of harmful sludge, varnish, clear turn difficult at low temperatures, to stop and prevent the leakage of hydraulic power steering, steering clear noise, completely replaced the old brake steering fluid.
3, fuel system cleaning and maintenance (that is, cleaning nozzle, valve carbon)
Under normal circumstances, the car should be cleaned and maintained 1 times per driving 10000km-15000km, or when you find that the engine is panting, sluggish and accelerate poor, take black smoke, weakness, cleaning and maintenance of oil when the 1 times. The removal of the system inside the resin and carbon, prevent harmful corrosion, avoid and stop the seal and water tank leakage, completely replace the old coolant.
As long as we usually pay attention to the car's maintenance, attention to detail, our car will be able to better maintain the new appearance.
LAUNCH X431 Diagun III 3 Scanner Original
LAUNCH X431 Diagun III 3 Scanner Original is LAUNCH's newly develpped Universal Scanner which is based on its previous version X431 Diagun. It covers more vehicles than the old X431 Diagun and has some progress to let this machine to be more friendly.
LAUNCH X431 Diagun III 3 features and progress as below:
1.X431 Diagun III connects cars through DBScar adaptor by Bluetooth.
2.Powerful diagnostic function let Diagun III 3 works on most of Asia,US and Europe vehicles.
3.More friendly Interface let You now can go into diagnostic system directly after starting machine.
4.Compact design to make it slim on your hands!
5.Compact design makes DBScar connector avoide of dust & oil by window.
6.Diagun III 3 support standard USB printer.You can print diagnostic result.
7.Continually update makes you works on more and more cars.
8.Better battery system makes Diagun III 3 non-stop working for 10 hours!
You can go to GO2OBD.NET buy LAUNCH X431.

KESS V2 Master ECU Tuning Tool No Token Limit

November 22, 2016

A car is convenient for people's life, but also so many do not understand the car owners think car beauty and maintenance is very troublesome, in fact, car beauty and maintenance although time spent, if the owners find the right method for the project can also be a lazy car, also can let the car stay beautiful and good performance.
1 protection car paint with automotive coating replacement
Waxing and glazing paint protection is in the high-end car owners pay more attention to the automobile cosmetology project, it is a waste of time often go to waxing and glazing, automobile coating is a gradual replacement of wax sealing glair automotive beauty items, coating paint can be completely sealed, form a layer of film layer more than 3-8 times the hardness of paint on the body the paint is not guaranteed, oxidation, corrosion, avoid minor scratches etc.. The automobile coating warranty time can reach 2-5 years, as long as the owner of the car center can protect the car paint. In addition, the interior cleaning and disinfection for 3 months to do it once, to the professional car beauty shop for interior cleaning, and coated with a layer of protective glazing agent can make the car to keep the car feeling.
4 filter to the repair shop to replace
Always pay attention to the cleaning of the filter of the car. Don't underestimate it, it has a direct impact on your car fuel. In the car engine in the process of using, dust and other impurities will be mixed with oil, and air oxidation and combustion of waste gas of oil, oil will gradually produce glial or sludge, which will not only accelerate the wear of parts, and easy to cause the oil plug. Therefore, regular cleaning of the filter for the car.
8 adequate for tire inflation
Correcting the tire pressure is the most important part of the safety inspection. Low tire pressure will result in abnormal wear or damage the tire tire pressure is too high, will make the tires and wheels are more susceptible to the impact of the uneven pavement deformation, or even cause a puncture. Tire pressure must be checked regularly, in addition to the spare tire, the other at least two weeks to check again, and tire pressure check must be conducted in the tire cooling conditions, otherwise the high temperature will make the tire pressure increased, the amount of up to. Also don't forget to regularly check the spare tire pressure is normal.
Master these you can easily keep your car in good condition.
KESS V2 Master OBD ECU Tuning Tool No Token Limit
KESS V2 Master ECU Tunning Tool is developped on its previous version KESS 1. This lasted KESS ecu tunning tool has bigger coverage,faster speed and so on. The newest version for it is V2.10. Please download vehicle supports list at below.
KESS V2 Master ECU Tunning Tool Vehicle List
Kess V2 has several built in features and safeguards including:
1. Check of the battery voltage in real-time
2. Full Recovery function in case of problems
3. Automatic correction of the Checksum, (where available)
4 Boot-Loader mode supported
5. Management of the programming counters
6. ScanTool function to remove DTC 
With coverage of all major brands and protocols including Line, CAN, EDC17 and MED17 and Ford J1850. Kess V2 is everything you need to work as a successful tuner at a very affordable price.
Note:Please DO NOT update this tool via internet because that surely damage machine. It is better close internet when you are working with this Kess V2 ECU TUNNING TOOL.
You can go to OBDMORE.COM buy it .

VAS 5054A SEAT Diagnostic Tool Good Quality

November 22, 2016

A car is convenient for people's life, but also so many do not understand the car owners think car beauty and maintenance is very troublesome, in fact, car beauty and maintenance although time spent, if the owners find the right method for the project can also be a lazy car, also can let the car stay beautiful and good performance.
1 reasonable purchase of insurance
Many owners in the purchase of auto insurance, often buy "excess insurance (Fang Xinbao)" and "inadequate insurance". Excess insurance, the insurance limit is higher than the actual value of the insurance subject, such as the purchase of a $120 thousand car, the insured amount of 300 thousand yuan stolen, if the total loss, the compensation is only 120 thousand yuan. The "insurance law" thirty-ninth paragraph second: the insurance amount shall not exceed the insured value, exceed insurance value, excess is invalid, i.e. the insured can get appropriate compensation for the loss of the subject-matter insured, but not because of the purchase of insurance to get beyond the subject-matter of the insurance value of income from. In addition, the full amount of insurance, the insured amount is less than the actual value of the insured value, this situation will be paid in proportion".
2 imports of tires is not necessarily the best choice
Car in the driving, in fact, to the four tires. However, in the purchase of various brands of imported tires, some people will inevitably enter the purchase of the erroneous zone. Many consumers out of psychological factors, more willing to choose the original imports of tires. In fact, the introduction of new tires abroad for domestic users, the price is too high, and it does not necessarily apply.
3 adequate for tire inflation
Correcting the tire pressure is the most important part of the safety inspection. Low tire pressure will result in abnormal wear or damage the tire tire pressure is too high, will make the tires and wheels are more susceptible to the impact of the uneven pavement deformation, or even cause a puncture. Tire pressure must be checked regularly, in addition to the spare tire, the other at least two weeks to check again, and tire pressure check must be conducted in the tire cooling conditions, otherwise the high temperature will make the tire pressure increased, the amount of up to. Also don't forget to regularly check the spare tire pressure is normal.
Master these you can easily keep your car in good condition.
VAS 5054A VW AUDI SKODA SEAT Diagnostic Tool Good Quality
This is VAS 5054A used for VW group cars include VW,AUDI,SKODA,SEAT,Bentley and Lamborghini. The latest software is ODIS 2.2.4, with bluetooth function and full chip OKI.
The VAS 5054A is used for VW group cars include VW,AUDI,SKODA,SEAT,Bentley and Lamborghini.Now our VAS 5054A Diagnostic Tool is with ODIS software. It is with bluetooth function and its software is in multi languages( please tell me what language of software you need when you buy it). 
The latest version of ODIS software is 2.2.6
Highlights of this VAS 5054A VAG Diagnostic with ODIS Software:
1. Good quality VAS 5054A Diagnostic tool with bluetooth function.
2. ODIS 2.2.4 support multi languages.
3. Full chip with OKI chip (for UDS protocol)..
4. Recognize ignition without any problem.
You can go to GO2OBD.NET buy VAS 5054A.

CarProg Full Programmer Latest Version With All Adapters

November 22, 2016

A car is convenient for people's life, but also so many do not understand the car owners think car beauty and maintenance is very troublesome, in fact, car beauty and maintenance although time spent, if the owners find the right method for the project can also be a lazy car, also can let the car stay beautiful and good performance.
1 filter to the repair shop to replace
Always pay attention to the cleaning of the filter of the car. Don't underestimate it, it has a direct impact on your car fuel. In the car engine in the process of using, dust and other impurities will be mixed with oil, and air oxidation and combustion of waste gas of oil, oil will gradually produce glial or sludge, which will not only accelerate the wear of parts, and easy to cause the oil plug. Therefore, regular cleaning of the filter for the car.
2 two years just need to change antifreeze
When the weather turns cool, once the cold air comes to a sudden drop in temperature, it is likely to affect the normal operation of the car cooling system. Then we must promptly release water in tap water with antifreeze. If your car has been using antifreeze, you do not have to immediately replace the. Antifreeze replacement cycle for two years, the replacement cycle of general antifreeze is 2 years to 3 years or 30 thousand km to 40 thousand km. Some antifreeze storage after one year, there will be a small amount of floc, this phenomenon is mostly caused by the additive precipitation, do not have to throw away. If a large number of particles precipitation, it shows that the antifreeze has gone bad, can not be used again. Need to be reminded that the replacement of antifreeze before the cleaning engine.
3 reasonable purchase of insurance
Many owners in the purchase of auto insurance, often buy "excess insurance (Fang Xinbao)" and "inadequate insurance". Excess insurance, the insurance limit is higher than the actual value of the insurance subject, such as the purchase of a $120 thousand car, the insured amount of 300 thousand yuan stolen, if the total loss, the compensation is only 120 thousand yuan. The "insurance law" thirty-ninth paragraph second: the insurance amount shall not exceed the insured value, exceed insurance value, excess is invalid, i.e. the insured can get appropriate compensation for the loss of the subject-matter insured, but not because of the purchase of insurance to get beyond the subject-matter of the insurance value of income from. In addition, the full amount of insurance, the insured amount is less than the actual value of the insured value, this situation will be paid in proportion".
CarProg Full Programmer Latest Version With All Adapters
CAR PROG Full is designed with regard to demands of our clients to have universal tool for odometers, dashboards, immobilizers repair, ECU repair and car radios, including advanced functions like EEPROM and microcontroller programmer, key ect.
You can go to OBDMORE.COM buy carprog .

Mercedes Benz MB Star Diagnose C4 With Latest Xentry

November 22, 2016

A car is convenient for people's life, but also so many do not understand the car owners think car beauty and maintenance is very troublesome, in fact, car beauty and maintenance although time spent, if the owners find the right method for the project can also be a lazy car, also can let the car stay beautiful and good performance.
The following is the China second-hand car owners to edit share 8 car beauty and maintenance skills, to help owners to easily keep the car.
1 protection car paint with automotive coating replacement
Waxing and glazing paint protection is in the high-end car owners pay more attention to the automobile cosmetology project, it is a waste of time often go to waxing and glazing, automobile coating is a gradual replacement of wax sealing glair automotive beauty items, coating paint can be completely sealed, form a layer of film layer more than 3-8 times the hardness of paint on the body the paint is not guaranteed, oxidation, corrosion, avoid minor scratches etc.. The automobile coating warranty time can reach 2-5 years, as long as the owner of the car center can protect the car paint. In addition, the interior cleaning and disinfection for 3 months to do it once, to the professional car beauty shop for interior cleaning, and coated with a layer of protective glazing agent can make the car to keep the car feeling.
2 simple parts themselves can be replaced
Wiper and so on, these two replacement and inspection are relatively simple, to buy their own online brand, and then carry out a simple inspection and installation on it.
3 proper maintenance is scientific
Car maintenance cycle refers to the distance between car maintenance mileage or time. There should be periodic maintenance, don't like spoiled children as spoil your car, although frequent maintenance is not a bad thing, but there must be periodic, avoid excessive maintenance caused by internal discomfort. In the early stage of the car is mainly normal maintenance, the cost is relatively low; when the vehicle is used for certain length of time or after a certain mileage will enter the maintenance period, the cost is relatively high. General car condition good new car, can be appropriate to extend the maintenance cycle; while the car is in poor condition or the use of poor conditions, it should be appropriate to shorten the maintenance cycle.
Mercedes Benz MB Star Diagnose C4 ( SD Connect ) With Latest Xentry
Mercedes Benz MB Star Diagnose C4 (SD Connect) With 9.2015 latest xentry,das, EPC,WIS software for Mercedes group 12V cars & 24V heavy duty after 2000 which also support UDS vehicles. Support wireless and lan cable connection, K line,CAN BUS and UDS protocol.
The new generation for Mercedes Benz SD connect c4 is the latest one on market for all current and new coming MB vehicles. SD Connect Compact 4 is a latest Benz wireless multiplexer. It will connect to the PC by wireless connection.
Highlights of Mercedes Benz MB Star Diagnose C4 (SD Connect):
1. Newest Update software 2015.09 xentry, das, EPC, WIS and so on.
2. Firmware (Bootlmage and CSD) can be updated for newer version.
3. Brand new relays and TDK 701 Filter for stable connection with 2 years warranty.
4. With good Wlan card build in card slot and FREE GIFT Intel Wireless Card!
5. Support both WiFi AND Lan cable connection. more easy to use!No need COM port computer.
You can go to GO2OBD.NET buy mb star c4.

FGTECH Galletto 2 Master Tunning Tool

November 21, 2016

The new owner of the best he has a record of the new owner of the car himself is best to have a detailed record. For example, when traveling to 5000 km, what to do in the maintenance, up to 40 thousand kilometers, whether the change of brake and so on, must be aware of. For each car maintenance, replacement of parts, are recorded in detail, like the "record card", be well aware of the car. The author also reminded the new owner, must spend some time to see the car's manual, a detailed understanding of the use and maintenance instructions about the car, and to read it as much as possible, in addition also should see more models of the forum, many of the old owners will be a lot of new car owners do not know the practical function the rich network of resources are of great help for better driving, car. Glass quickly remove fog inside the cold weather, sitting in the car too much, the temperature inside the car, the car is easy to produce gas, the glass is easy from the mist, blocking the driver's line of sight, the hidden potential danger. To solve this problem, then, put the switch to wind blowing the front windshield, with hot air, usually to open a file you can; if there is fog on the train, the first open air conditioning, fog soon dissipated, and then open hot air. The tips for autumn and winter travel is also very practical. Often check the oil and water to suggest that the new car should be mainly formed every week to check a good habit of oil and water, to see if they are not enough, the leakage does not leak. If it's not enough, make sure why. Car maintenance knowledge in general, if the decline is not large, basically belong to the normal loss. The oil circuit includes brake oil, gear box oil, engine oil, etc.. Some cars, the gearbox oil can not see, the owner can see where there is no parking leaking. Each run long distance, but also should be fully detected in the car's water, cooling liquid, etc., if the sun, but also check the rain enough to scrape the water.
FGTECH Galletto 2 Master Tunning Tool Plus BDM Adaptors
FGTech Galletto 2 Master BDM-TriCore-OBD Plus BDM adaptors is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode Tricore, checksum. This item cannot only work as FGTech Galletto 2 Master, but can also work for BDM-TriCore-OBD. This FGTECH Galletto 2 is with BDM adaptors make job so easy.
FGTECH GALLETTO 2 MASTER ( BDM-TriCore-OBD ) V11.9. Software version is V52.
(MPC5xx - EDC17 - Infineon TriCore - ST10Fxx - OBD2 (K-CAN)
FGTech Galletto 2 Master this new system developed with high-speed USB technology is the fastest and most secure product on the market, it is easy to install and use by anyone. Our system comes furnished complete with all Car, Truck, Motorbyke, Marine, BDM MPCxx , BDM Boot Mode Tricore, checksum.
If you want to buy fgtech, you can go to GO2OBD.NET.

Highly Quality Volvo Vida Dice Diagnostic Tool

November 21, 2016

Learn how to see the instrument panel fault novice to drive, learn to look at the dashboard is very important. Always pay attention to the pointer on the dashboard, look at the icon displayed on the dashboard at any time. All see the red light on the dashboard, as soon as possible to stop the check. When traveling in the rugged road, knowledge of vehicle maintenance should pay special attention to avoid the chassis scratch, otherwise it may put the oil pan pot broken, causing the oil leak. Of course, in this case, the dashboard will show a red oil pot and water signs of water. At this time should immediately stop and check. If you do not know the situation, continue to move forward, it will be a big problem, resulting in damage to the engine. Parking must pull the hand brake for car owners, in addition to some time to adapt to the dashboard, car and pull the handbrake to shift a lot of practice. Some owners in the habit of stopping the gear lever in the neutral, in fact, this habit is not good, easy to make the shift lever into forward gear, which lead to danger. From the safety point of view, the new owner in the parking must pull the handbrake, especially on the ramp, avoid the risk of car back. Also, once the car will travel, handbrake must be put in position to start. Many novice, the new owner for a new car, often easy to ignore this problem, until the car "quack" hard driving for a while realized, however, did not put the handbrake, is also very large for car damage. At any time to pay attention to the abnormal sound of the car driving, the driver should pay close attention to the sound of each part of the vehicle. Once the car has abnormal sound, first of all to accurately determine the sound from the car or outside the car. If the abnormal sound from the car, you should pay special attention to check the parking. In the case of no extinction, if the sound disappears, can be judged to be traveling in the process of abnormal sound. The new owner should carefully listen to the voice from which position, which direction may be wheels, tires, gearbox, transmission shaft, hanging ring, may be tire nails or sticky stones ring, may be not the brakes, may also be the result of density components normal noise etc.. Owners can be different reasons for their own judgment and investigation.
Best Quality Volvo Vida Dice Diagnostic Tool With 2014D VIDA ALL IN ONE and EWD Software
1. This is Volvo Vida Dice with latest Via All in One software updated to 2014D supports multiple languages.
2. Our Volvo VIDA DICE is with full chip, NOT J2534 protocol one.
3. Firmware of our Dice Volvo can be updated to works with new software.
4. With VOLVO 2014D and EWD (Electronic Wiring Diagram).
5. Please note: It does not works on new XC90 Doip.
1. VIDA DICE in original PCB and IC supports full functions and enter all systems of vehicle.
2. VIDA DICE in original PCB and IC can works with newest dice software which you download. That means you do not need us to send you software. Just use it with newest software you download!
3. The firmware of this Vida Dice can be updated by newest software. No crashing, no problem.
If you want to buy volvo vida,you can go to OBDMORE.COM.

View older posts »

GO2OBD - High Quality Car Scanner Center

We engaged in Auto Maintance market from middle of 2008. Our main products includes LAUNCH X431,Autel Scanner, OEM OBD Scan Tool, Car Key Program Tool, ECU Tunning Tool and so on. From 5 years experience, we absorbed much exprience from this zone and that helpped us to establish effective business system from purchasing, customer service to tool testing etc.
 
We also have good relationship with LAUNCH,AUTEL,HRT and YANHUA to wholesale their good products.
If you are wonderful tool maker with your own brand, we welcome you to contact us for business.
 
Our target is providing first class products with most reasonable price,customer service is very important to us as well. Your question and suggestion will be warmly welcomed. You can talk with our saleman and service man easily from the windown ONLINE SUPPORT, we will be there for answer your question. let's make it better!